A hospital bed with height adjustment and mattress platform positioning by means of electric motors. The patient surface consists of 4 sections, and is made of welded meshing. The bed offers many degrees of vertical adjustment, and adjustment of patient surface area settings. A model with single collapsible side rails welded to the bed frame is also available.
The bed is equipped with painted tubular steel bed ends as standard. To make the bed more attractive and to improve cleaning, the bed can also be provided with E1 or E3 plastic ends.
As standard, all beds are equipped with holders for trapeze and infusion stands. The holders are situated at the corners of the head end of the bed.
Using a raster, the calf section can be mechanically adjusted to 5 height levels.
The mesh in mattress platform sections is welded under the upper edge. The standard metal mesh mattress platform can be provided with plastic covers for better cleaning.
Bars with plastic hooks are situated on both sides of the bed. The bars can be used to hang small accessories (holder for slippers, basket for a bedpan, Redon bottle holder).
The length of the bed can be extended by up to 20 cm. The foot crossbar can be extended in length by 10 cm and another 10 cm extension is available at the head section.
Outer dimensions without side rails (with side rails) |
214cm x 97(106)cm |
Mattress Platform Shortened/Extension | 0/+20cm |
Recommended Mattress Size | 200cm x 86cm x 15cm |
Max. Mattress Height | 18cm |
Bed Height | 40.5 –81cm |
Maximum Backrest Angle | 75° |
Maximum Thigh Rest Angle | 45° |
Trendelenburg/Anti-Trendelenburg Positio | +0°/-0° |
Heightof Side Rails (above Mattress Platform) | 40,5cm |
Weight (Basic Equipment) | 98kg |
Safe Working Load | 170kg |
Max. Lifting Pole Load | 75kg |
Max. Patient Weight | 150kg |
Height adjustment |
motor |
TR/ATR tilt adjustment | N/A |
Backrest adjustment | motor |
Thighrest adjustment | motor |
Calfrest | mechanical ratchet |
Bed extension | mechanical |